久久久美女,免费日本视频,亚洲天天做

BYD lithium battery explosion-proof forklift charging process video- The application scenario guarantees the confidence of the product

Check the automatic gearbox system, replace the automatic gearbox and filter 5 In addition, iron batteries can be fast-charged in 1 hour and can be used at any time without affecting the battery cycle (4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Cause: Charger failure, electrical circuit failure, etc

The air gap can be adjusted multiple times

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

In particular, managers took the lead in illegal operations, and production safety was out of control

Generally, it is one year or 1,000 hours (whichever comes first)

For example, in the logistics of pharmaceutical products, pharmaceutical logistics warehousing has the characteristics of high environmental requirements, high distribution frequency, and timely distribution

(4) When a forklift approaches or removes objects, the vehicle speed should be slow and steady, and care should be taken not to crush objects, wooden mats, etc Flexible configuration of the forklift for subsequent use Technical parameters of portable lifting forklift: Name: Electric hydraulic lift forklift Model: ND-500J Battery: 48V12ah Motor: 500W Weight: 115kg Loading capacity: 500kg Fork length: 924mm Total size when unfolded: 1950X575X1290mm Rated load: 500kg Maximum load: 500kg Working voltage: 48v 2

BYD lithium battery explosion-proof forklift charging process video-

Intelligent forklift solutions reduce the burden of warehousing operations Under the pressure of improving service levels, reducing inventory, saving time and minimizing costs, it is obviously becoming more and more important to have more intelligent and information-based warehousing equipment

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward The larger the minimum ground clearance, the stronger the electric forklift's ability to adapt to the environment

(3) After unloading, the forks should be lowered to the normal driving position before driving

Their electric steering system, acceleration control system, hydraulic control system and brake system are all controlled by electrical signals, which greatly improves work efficiency and reduces the labor intensity of operators

As the most important handling tool, forklifts will be subjected to the most demanding operation tests The valve components and seals need to be replaced if they are worn and aged The entire freight process can be completed by one person, which has replaced manual transport trucks to a certain extent

"It is difficult to see the position of the forklift when it is lifted or lowered, especially for warehouse forklifts

Lead-acid batteries are heavy, large, and of low quality, especially the charging and discharging requirements are very strict Therefore, full attention should be paid

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

BYD lithium battery explosion-proof forklift charging process video- (CATL)

Lithium-ion batteries and lead-acid batteries are power batteries of two different systems, and the battery principles are also different

After years of practical experience and market accumulation, BYD Forklift has become a leader in logistics and handling solutions in many industries, and has been highly recognized by customers, helping the green development of logistics and industrial acceleration of industry enterprises

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

They can be used for stacking, loading and unloading, and handling goods in warehousing, machinery, chemicals, textiles, printing, logistics, and other industries

If the bending and twisting deformation of the electric forklift mast is small, it can be corrected by cold correction with static load Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Only when all the equipment of the electric flatbed truck is functioning normally can the flatbed truck be operated

If the oil leakage is caused by valve body leakage, we only need to replace the valve body's sealing ring

Pay attention to the appearance of the forklift Although it is a second-hand forklift, its overly damaged appearance not only looks unsightly, but also poses a great safety hazard when used

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info