欧美日韩在线第一页,日本欧美国产,亚洲天堂一区二区

BYD forklift charging time calculation method -

Charging voltage is too low Phenomenon: The charging indicator light flashes or the ammeter swings around zero

At present, AGV products include stacking AGV, counterbalanced forklift AGV, pallet forklift AGV, reach forklift AGV, three-way stacking AGV, heavy-load traction AGV, outdoor unmanned traction AGV and customized non-standard conversion unmanned handling vehicles In order to facilitate communication and expand personal connections, we have created five major industry logistics circles

Pay attention to the strength when turning the knob

Even if the forks of the battery transporter can pass through the sockets of the double-sided pallet, they cannot be lifted

First of all, we must find out the cause of the abnormal noise

Due to the mature market development, manual trucks are economical, comfortable, and labor-saving

("Anhui Heli"), a leading enterprise in China's industrial vehicle industry, acquired Ningbo Lida Logistics Equipment Co

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

When the AGV is driving at low speed with a full load and the deviation level is large, the distance from the instantaneous center to the vertical axis of the AGV is an important parameter to determine the space required for the vehicle's turning operation

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone The appearance and structure of the products were basically the same, and some even had the same color

BYD forklift charging time calculation method -

When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

Terms such as rated load, maximum lifting height, channel width, etc

3 In this way, the forklift can be lifted slightly to a certain height after picking up the goods and then retracted, ensuring the stability of the forklift during operation

Electric counterbalanced ride-on forklifts and electric ride-on warehouse forklifts still have a lot of room for improvement

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

The following is shared by the editor of new energy forklifts: As one of the important products of electric forklifts, the sales volume of reach stackers is increasing year by year

Let me introduce the operation method of electric pallet forklift

The application scenario guarantees the confidence of the product

BYD forklift charging time calculation method -

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

During peak hours, a large number of trucks are waiting in line for loading and unloading operations

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

(8) When operating, forklifts must comply with factory traffic regulations and maintain a certain safe distance from the vehicle in front

The price is less than a quarter of Linde and half of Heli

How often is the forklift license reviewed? The "Special Equipment Operator Certificate" is reviewed every four years

Check the sensitivity of each control system

Features of wheels of various materials: 1

When the ambient temperature is 40℃, the relative humidity should not exceed 50%

The correction method can be used to eliminate the deformation of the mast of the electric forklift

Secondly, lithium batteries have a long life, about three times that of traditional lead-acid batteries

Otherwise, it is easy to damage the ground and forklift wheels, and it will cause accidents such as cargo collapse, damage to buildings and injuries to personnel

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info