久久久久久久网站,亚洲欧美日韩另类精品一区二区三区 ,伊人影院在线观看

BYD high-lift forklift manufacturer phone number-

In the daily maintenance process, we need to do a good job of maintaining various gaskets

The operator must first understand the instructions for use of the counterbalanced electric forklift

It is a power technology update driven by the concept of energy conservation and environmental protection

Hydraulic oil, gear oil, and lubricating oil all use special low temperature resistant grease, which can enable the vehicle to obtain long-term stable hydraulic and transmission performance in the cold storage

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4 In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

Check whether the bearings are running well

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

If the connecting rod bolt is tightened too much, it will be damaged, which will cause damage to the engine cylinder

Plastic pallets can be divided into double-sided pallets and single-sided pallets

(11) It is prohibited to turn on a ramp, and you should not drive across a ramp

Safety is the most important part of the equipment

Have a level of education that is appropriate for the type of special equipment operation for which the forklift license is applied; 4

Let's take a look! 1

BYD high-lift forklift manufacturer phone number- 2

Try to turn slowly

At present, most battery forklifts, stackers and transporters on the market use lead-acid batteries

For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

It has low cost, but low storage efficiency and poor scenario applicability

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable Many customers don't know that the main mechanism of metal corrosion is the conversion of raw metal into metal oxides, which causes structural parts or components to rust, damage, or even become irreparable and scrapped 2 9 Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

At the same time, in order to enhance the driver's sense of security during use, guardrails, intelligent recognition functions of pedal positions and three-speed design protection are specially installed to improve driving safety from multiple dimensions

In the following years, Zhongli continued to innovate and launched products with innovative design concepts such as "Big King Kong" and "Micro King Kong"

Then tighten the brake mounting screws

BYD high-lift forklift manufacturer phone number-

It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area Be in good health and meet the special physical requirements of the forklift operation you are applying for; 3

The longer control handle reduces the steering force and makes the operation easier

There is still a big gap between the penetration rate of forklift electrification at home and abroad Under the background of low-carbon and environmental protection, the electrification transformation and upgrading of the forklift industry has become an inevitable trend of industry development

The same is true for food logistics In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

2*1

In September 2019, Anhui Heli also invested in the company with the aim of promoting its layout of the lithium battery new energy forklift industry chain

Prototype test plan The prototype test plan needs to test the unmanned forklift body performance from five aspects: basic body performance, load capacity, lifting capacity detection, high side fork detection, and fork deflection detection

5 meters, 4 Electric forklifts have become a more practical factory transportation equipment at present Notice! Operating the stacking forklift at low voltage for a long time will damage the battery life 3

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info