日韩二区三区,国产免费一区二区三区,日韩精品一区二区三区在线

BYD Electric Forklift Battery Maintenance Schedule-

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

5 times the rated torque

Advantages: 1

The basic operation of an electric pallet truck is to raise and lower the forks, and to move the vehicle forward and backward

Electric transport trucks are time-saving, labor-saving, cost-saving, and highly efficient

Hydraulic control The raising and lowering handles on the body panel control the raising and lowering functions

Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

Electric: The electric motor is used as the power source and the battery is used as the energy source

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

Pay attention to driving speed because slippery areas can easily cause side sliding

The electrification trend of forklift product structure has been continuously confirmed by the market

5 meters, 5

2 4

BYD Electric Forklift Battery Maintenance Schedule-

If the driving control switch is loose and causes failure, lock it in time

1% If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

Battery maintenance is also very important, and there are many details that need to be paid attention to

6 operating speed Automatically guiding the maximum speed that an electric truck can achieve when driving under a rated load is an important parameter that determines the vehicle's operating cycle and transportation efficiency

What kind of faults usually occur when electric forklifts are in use? Electric forklifts, I believe everyone is familiar with them, right? Generally speaking, mechanical equipment will inevitably fail after long-term use, and electric forklifts are no exception

In addition, it takes effort to choose a high-quality electric hydraulic transporter

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

The electric forklift manufacturer told the company that the width of the shelf must be carefully calculated and the safety issue should not be underestimated

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

The larger the load, the more expensive it is

BYD Electric Forklift Battery Maintenance Schedule- The minimum mast tilt should be used to stabilize the load to prevent the load from sliding backwards

They have the advantages of simple operation, flexible movement, light weight, energy saving and environmental protection, and superior performance

?What are the advantages of BYD lithium battery forklifts? (1) Long life: Under normal charging and discharging conditions, after 4,000 cycles, the capacity retention rate is greater than 75%; the battery life can be maintained for more than 10 years; the forklift does not need to replace the battery during its life cycle

Operators of explosion-proof electric forklifts must be qualified to use the equipment, operate it in accordance with regulations, and avoid unnecessary dangers

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134 Say goodbye to the traditional camera that needs to be connected to the power cord, and you no longer have to worry about lifting and twisting the wire

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

The following subdivided industry application scenarios will help you understand the technical advantages of BYD's new energy forklifts

Save costs

Under the general trend of green environmental protection and intelligent manufacturing, more and more new energy forklifts have become the first choice

(2) Turn the key switch to the on position

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info