成人免费视频观看,国产精久,黄色网址在线免费观看

BYD all-electric forklift maintenance standards- 2

Check whether the contact points are worn

Lithium batteries can be charged and discharged quickly, and can be quickly charged during employees' breaks and meals, which can increase the effective working time and improve the utilization rate

Manual transport trucks mainly rely on manpower to push and pull goods, with a low degree of automation

Lithium-ion batteries and lead-acid batteries are power batteries of two different systems, and the battery principles are also different

Below we will explain in detail the driving operation and steps of electric hydraulic transport trucks

Human handling is extremely labor-intensive and costly, and even poses safety risks

Nameplate of electric pallet truck The nameplate contains the vehicle model, rated lifting capacity, maximum lifting height, deadweight, and factory serial number

It is not allowed to operate with a single fork; 4

The overall design of the equipment conforms to ergonomics

In a cold storage environment, the temperature difference will cause water droplets to form inside the cylinder and rust, affecting the operation of the lifting cylinder

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

Internal combustion forklift vs electric forklift Electric forklifts are electrically driven

BYD all-electric forklift maintenance standards-

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small

(12) When a forklift is carrying cargo downhill, it should drive in reverse to prevent the cargo from falling off

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

Customers are not allowed to disassemble and adjust the motor stator components without permission

They are industrial handling forklifts, which are generally used in factory workshops, ports, stations, and airports to load and unload goods

Considering the width of the forklift's operating channel, if you cannot purchase a high-cost reach forklift, you also need to consider whether to choose a three-wheel or four-wheel forklift

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

After the engine is started, it usually has enough warm-up time to operate at low speed and low load until the engine, transmission, hydraulic system and heated oil are finally driven

Electric forklifts are substantially different from traditional internal combustion forklifts in terms of power, so their operating procedures are also somewhat different Keywords: side stacking, unmanned forklift, hydraulic synchronization 1 The basic operation of an electric pallet truck is to raise and lower the forks, and to move the vehicle forward and backward

5 meters, 5

Make more comparisons and choose the one that suits you best and has the best cost-effectiveness

Battery forklifts are mostly used in indoor places such as warehouses, where the environment changes little, and the corrosion caused by environmental factors is relatively light The temperature of the buffer zone should be kept at around 0°C and the humidity should be kept below 40%

BYD all-electric forklift maintenance standards-

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

Which type of transporter is more suitable for them? Below, the electric transporter manufacturer will analyze the pros and cons of the two

Electric forklift manufacturers remind that if the center of gravity of the goods shifts during the forklift process, don't worry, just adjust it in time

Improve operating efficiency Fast charging mode: 1-3 hours fast charging mode is suitable for multi-shift work

It is also called a palletizing forklift

What are the advantages of lithium batteries? 1

Only personnel who are 18 years of age or older and have received special training can use this counterbalanced forklift

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

There are four inspection windows at the commutator end of the railway train motor for regular inspection and maintenance of the motor commutator and replacement of brushes (4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

Fault 2: Sliding down when loaded When an electric transport truck slides down while loading, it is usually due to oil leakage in the oil pipeline or oil joints

Generally speaking, the larger the load capacity of a forklift, the more expensive it is

6 Among them, safety is the key factor that enterprises pay attention to

022

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info