韩国毛片在线观看,中文字幕日韩一区,久久小视频

BYD electric reach forklift is not moving-

Easy maintenance: The easier it is to operate and maintain, the less worry and more assured customers will feel

For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation

warn! Do not operate an electric pallet truck with serious functional defects that endanger safety

We will lead the development trend of hybrid and electric technologies and provide customers with more energy-saving, compact, efficient and intelligent solutions

Low operating cost With the increase in international oil prices, the operating cost of electric forklifts is lower than that of fuel forklifts

This is especially true on a slope, otherwise there is a risk of rollover

The basic operation of an electric pallet truck is to raise and lower the forks, and to move the vehicle forward and backward

The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button

Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

When loading and unloading goods, dragging the pallet on the ground will cause scratches on the ground

There is an emergency power-off button on the truck body, also called an emergency stop button, and on the handle are the fork lift button and the forward and backward knob

In the new "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the regular inspection cycle of forklifts will be adjusted from the original 1 year to 2 years

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

Counterbalanced Forklift AGV As human resource costs continue to rise, more and more factories have established their own automated production lines

Various parts on the vehicle can be replaced in a very short time

BYD electric reach forklift is not moving- In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor Since fuel is easy to refuel, they can achieve long-term continuous operation and are capable of working in harsh environments

During peak hours, a large number of trucks are waiting in line for loading and unloading operations

When the product is in use, the rated load should be larger than the actual load, so that the electric transport truck will be more durable and have a longer life

When the equipment is working, operate the bucket, blade and various control devices slowly, and prohibit high throttle, impact, scraping, shoveling and pushing, etc

3%; among them, domestic sales volume was 151,000 units, a year-on-year increase of 58

Equipment transportation by electric trucks

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance

It can provide sufficient electrical energy according to the corresponding instructions

After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance

After charging is completed, reset the power socket

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

The steering system, hydraulic control system, and acceleration and braking system are all transmitted by electrical signals, which greatly reduces the workload of operators and is very helpful in improving their work efficiency and accuracy

The development process of lithium battery and new energy forklifts is basically consistent with the development history of the current internal combustion forklifts

BYD electric reach forklift is not moving-

They are efficient equipment for mechanized loading and unloading, stacking and short-distance transportation

When starting the forklift, maintain a moderate starting speed and do not start too hard

1 The vehicle has a compact body, flexible movement, and light weight, which is a must-have in warehouses now

At lower temperatures, higher relative humidity is allowed

The electrical parts and connectors must be arranged inside, and protective covers can also be added

The technical director also put forward a similar view

(2) Do not raise the forks too high when driving

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

Use of charger ①The charger we equip for stacker trucks has excellent constant current characteristics and extremely fast overcurrent protection capabilities

and Hangzhou Pengcheng New Energy Co Some worked hard on the appearance, some improved the workmanship, some strengthened the performance, and some worked hard on the cost

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info