欧美日韩影院,国产高清在线,五月在线视频

BYD workshop special forklift usage tutorial-

Comparing the take-off and landing speeds, manual trucks are slower than electric trucks and require manual operation, which is time-consuming and labor-intensive

You don't need to measure this data yourself, the electric forklift manufacturer will provide it to you

If it is lower than the bottom of the distilled water bottle, add water

Forklift products have a warranty of two years or 2,000 hours

In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks

The part structure is mainly used for the implementation of protection technology, and the process holes can be opened when necessary In the cold chain logistics system, forklifts play an important role in the transfer link of storage and transportation Double-sided Tian-shaped pallets cannot be used The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time When driving on a wet or slippery road, slow down when turning and drive carefully

The equipment is equipped with an intelligent operating handle, which can be electrically lifted and moved, saving time and effort

Electric pallet trucks are also called electric transport trucks, electric pallet trucks, electric hydraulic transport trucks, and automatic transport trucks

Warehouse work is increasingly inseparable from 3-ton electric forklifts, because the introduction of electric equipment will greatly improve work efficiency and save costs

In order to make huge profits, they often replace the "three no" products produced by small workshops with famous brand logos to deceive buyers

BYD workshop special forklift usage tutorial-

The humidity of the buffer zone can be controlled with the help of a dehumidifier, or the temperature can be controlled by isolating the loading and unloading area to ensure a lower humidity

The fifth step is to slowly lift the fork

At present, the company has formed small and medium-tonnage counterweight series, large-tonnage counterweight series, storage truck series, tractor series, micro truck series, AGV intelligent storage series, aerial work platforms, cleaning vehicles, and sightseeing trucks

There are two installation methods for the travel motor: vertical and horizontal motors

We can recall that when the carburetor was not carefully maintained, was there a situation where the tension spring gasket fell into the intake pipe? This will cause the piston to be scrapped

Do you know the advantages of forklift lithium batteries? With the continuous development of social science and technology, and the current situation of energy conservation and environmental protection being advocated all over the world, there are more and more energy-saving products on the market

AC drive motor, without carbon brush, basically requires no maintenance, reducing maintenance costs

The greater the output of the same product, the lower the purchase cost of a single component will be

The constant pressure spring pressure borne by the carbon brush should be normal, and the total area of the carbon brush during the running-in period should not be less than 80%

They are made of polyethylene, formed in one go, stable and durable

When picking up materials from the loading area, the action flow is shown in Figure 1-(a) The polyester tire with steel mesh can ensure that the forklift has sufficient driving force and good handling effect even on the frozen ground

We must strengthen the supervision of forklift operators

The new architecture and edge computing architecture generated by 5G will soon meet the low-time, high-speed operation, and rapid decision-making requirements of driverless cars The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully

BYD workshop special forklift usage tutorial-

Precautions for using electric forklifts in warehouses 1

If it is higher than the standard value, it indicates that the charging voltage is too high

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

Application environment: 1

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

Forklift is one of the commonly used transport vehicles nowadays

Electric forklift manufacturers remind that there are many things that companies need to pay attention to when purchasing a 3-ton electric forklift When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries

In 2020, the proportion of domestic electric forklifts was only 51%

Check cooling water and engine oil; 2 Without flexible lifting and handling tools, it is impossible to move goods by manpower alone

"Cobalt-free" and "low lithium content" achieve the environmental compatibility of the battery and greatly reduce the cost of waste disposal

Consider the issue of pneumatic tires and solid tires

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info