国产精品美女视频免费观看软件,97色干,欧美日韩综合一区

When is the best time to charge the battery of BYD's forward-reaching lithium-ion forklift?-

The coping methods mainly include shot peening of metal structural parts, paint film strengthening treatment, and rust prevention of bolts, nuts and machine pins

Flexible control and precise positioning; 3 The long-lasting battery endurance can keep the machine in good and optimal condition

Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

The noise value of the brake is related to the size

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions24% over the previous year, especially electric walk-behind storage vehicles, which still maintained a relatively high growth In addition, each supplier will emphasize some technical innovation and design in the security protection details of their products, but as long as the previous ones are basically determined, these are things to be considered based on the procurement costs 9

The rapid development of the logistics industry requires forklifts with short charging time, long service time, stable performance, high-intensity operation, and high degree of automation and intelligence

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

As for the third type of electric technology forklifts, they have not yet been put on the market in large quantities Among them, fully electric pallet trucks are popular among enterprises because they save time and effort in operation and are very simple to maintain

(2) Do not raise the forks too high when driving

When is the best time to charge the battery of BYD's forward-reaching lithium-ion forklift?-

Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted

0SD offers increased speeds when loading and unloading, making it ideal for travelling long distances or working at loading docks

4 The new generation of electric forklifts will have better maintainability and operability, and the display and fault diagnosis systems will be more complete Over the years, the magazine has successfully held a number of brand activities in the clothing industry, retail industry, manufacturing industry, home furnishing industry, logistics equipment industry, etc

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Counterbalanced forklift operators should try to avoid sudden stops and turns

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

The operation of forklifts is a blessing What are they? The following is a brief sharing by BYD lithium battery forklift: It needs to be emphasized that the difference between lithium-ion forklifts and traditional electric forklifts is not as simple as replacing batteries The third is three-dimensional warehousing based on unmanned forklifts[1], which is mainly used in scenarios with medium and low shelves and multi-channels

It is widely used in logistics, warehouses, factories, hospitals, schools, shopping malls, airports, stadiums, stations and airports, etc

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

When is the best time to charge the battery of BYD's forward-reaching lithium-ion forklift?- Cause: The charger's operating voltage is out of regulation or faulty, or the battery is faulty

Various parts on the vehicle can be replaced in a very short time

The electric truck uses a battery as the power source At present, well-known foreign brands are gradually completing their product series, forming products of different standards from micro to extra large

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

The function of the safety valve is to allow the oil to flow back to the oil tank from the return pipe when the oil pressure in the system exceeds a certain value Check whether the insulation and connecting parts are damaged or loose When the voltage fluctuates, it automatically stabilizes the output current If you directly charge a battery with frozen electrolyte, it may explode During normal use, pay attention to the insulation of the battery

, to ensure safety in explosion-proof environments

0 to 45 The double-drive axle makes maintenance easier to operate and more convenient

Cab: Since most electric forklifts are used for indoor handling, there is no enclosed cab, and only a protective overhead guard is installed

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info