欧美视频三区,色视频久久,91福利在线播放

BYD Lithium Battery Forklift Phone Number-

The motor provides power to drive the equipment to move

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have expanded the application scope and application space of BYD forklifts What should I pay attention to when using an electric transport truck? What should I pay attention to when using an electric transport truck? Electric transport trucks are also called electric pallet trucks in the industry

Do not start the forklift before the battery is fully charged

According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations

When the gear is adjusted to the tortoise speed, the speed of the electric transporter will be limited and will not accelerate too fast, which is suitable for working in narrow spaces

Product layout continues to deepen In fact, my country's electric forklift market has shown a high growth trend since 2017, with sales increasing by 43 Before entering the cold storage, please operate the hydraulic and travel movements until the temperature of each component rises before entering the cold storage In this way, the forklift can be lifted slightly to a certain height after picking up the goods and then retracted, ensuring the stability of the forklift during operation

Standing driving, walking, side driving, guard plates, pedals all have different variables

Then tighten the brake mounting screws

Below, the editor will briefly tell you how to prevent corrosion and rust on new energy forklifts To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

BYD Lithium Battery Forklift Phone Number- with ZF (China) Investment Co From the above we can see that it is not difficult to find the cause of the abnormal noise of the electric pallet truck, but it requires the driver to have enough patience to solve it It is not allowed to drive while raising or lowering the fork; 2 If necessary, add 45# hydraulic oil0 tons

We are a manufacturing company that develops and manufactures equipment handling products

② Raise the fork to the top position to check whether the hydraulic oil in the hydraulic system is sufficient

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

When turning, the electric pallet truck must not be allowed to make a sharp turn at high speed

The humidity of the buffer zone can be controlled with the help of a dehumidifier, or the temperature can be controlled by isolating the loading and unloading area to ensure a lower humidity

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods

BYD Lithium Battery Forklift Phone Number-

Moreover, unlike manual trucks and semi-electric trucks, it is equipped with a standing board, which allows you to stand and drive without using manpower

BYD forklift solutions in cold chain logistics: Cold chain logistics transportation equipment has more obvious requirements for low temperature "No cobalt" and "lower lithium content" complete the battery's environmental compatibility and significantly reduce waste disposal costs When the product is in use, the rated load should be larger than the actual load, so that the electric transport truck will be more durable and have a longer life On September 25, 2019, the company announced that it invested 23 million yuan to hold a 23% stake in Pengcheng Technology, which produces power battery systems for non-road vehicles

Through the application of unmanned forklift, we can realize the handling of heavy goods, effectively speed up work efficiency, and well solve the problems of increasing the amount of logistics information and the high intensity of labor relations in manual handling in my country's industrial production

Move the joystick to adjust the height of the forks so that the forks are at the same height as the gap at the bottom of the cargo

For example, the oil disc valve cover is not easy to compact due to the large contact area, which may cause oil leakage

Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use

Next, the electric forklift manufacturer will tell you several common parameters of electric forklifts

The electric transport truck has an ergonomically designed control handle, which is convenient for left-handed and right-handed operation and provides comfortable driving

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

5T, 1

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

久久精品亚洲精品国产欧美kt∨_一区二区三区影院_99精品99_91视频在线免费观看_综合久久99_欧美一区二区免费

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info